2005

Parameter

Specifications

Remote Programming Rear panel barrier block terminals are

provided for remote programming of the

output voltage. The ratio of the program-

ming resistance to the output voltage is

1000 ohms per volt. The programming

accuracy is better than 0.01% of the

resistance value, including the resistance

of the programming leads.

Metering

Front panel volt—ammeter permits monitoring

output voltage or current with an accuracy

of ±2% of full scale.

NOTE:

This accuracy is considerably less

than that of the power source.

Circuit Protection

The AC line and DC load circuits are

separately fused. The fuses are accessible

at the rear of the unit.

Indicator Lamps

AC Lamp

Lights when AC toggle switch is set to ON

and power is applied to the unit.

OVEN Lamp

Lights when AC input is applied and oven

heater is energized (operates even when

AC toggle switch is turned off). Lamp

cycles on and off as oven maintains

constant temperature environment for

critical components.

+10 V Lamp

Lights when RANGE switch is set to 1O—20V

position to indicate that output is 10

volts plus the dial readout.

645

1—3